Enviro-LOGO

Pressure sensors PBS Hygienic

Category Tag
  • Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections
  • Suitability for CIP and SIP ensures high system availability
  • Safe and easy setup with three large pushbuttons and legible, rotatable display
  • Rotatable housing for optimum cable routing
  • Wide range of available configurations enable customer-specific solutions
  • High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings
  • Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products

Overview

The electronic pressure switch PBS Hygienic has been designed for use in the food and beverage industry. The wetted parts are gap-free and have no dead spaces. Their high-quality stainless steel surfaces are smooth and easy to clean. The highly resistant stainless steel membrane is welded to the hygienic process connection without gaps or edges.

The device is designed for CIP and SIP processes. This enables safe hygienic operation in conjunction with optimized system throughput.

The PBS Hygienic is available with up to two switching outputs, an analog output and IO-Link in a single device. Its intuitive configuration via three large pushbuttons and display facilitates operation. The housing can be rotated in two ways, allowing the display and electrical connection to be aligned according to specific installation situation. Available with a variety of measuring ranges and process connections, the PBS Hygienic is suitable for universal use.

At a glance
  • Hygienically-graded pressure switch with display for the food and beverage industry
  • Wetted parts are made from stainless steel 1.4435
  • Individually programmable switching outputs and analog output
  • Pressure values are indicated on the display
  • Unit of pressure value in the display can be switched
  • Output states are indicated separately via large LEDs
  • IO-Link

Technical data overview

Device type Pressure switch
Measuring ranges
Gauge pressure 0 bar … 1 bar up to 0 bar … 25 bar
Absolute pressure 0 bar … 1 bar up to 0 bar … 25 bar
Compound pressure –1 bar … 0 bar up to –1 bar … +24 bar
Pressure unit Bar, MPa, psi and kg/cm2
Accuracy ≤ ± 1 % of the span
Setting accuracy of switching outputs ≤ ± 0.5 % of span
Output signal Switching outputs PNP or NPN, analog output signal plus optional IO-Link
Electrical connection Round connector M12 x 1